141 lines
6.2 KiB
Plaintext
141 lines
6.2 KiB
Plaintext
/**
|
|
* These arguments were used when this file was generated. They will be automatically applied on subsequent loads
|
|
* via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
|
|
* @cliArgs --device "MSPM0G350X" --part "Default" --package "LQFP-48(PT)" --product "mspm0_sdk@2.07.00.05"
|
|
* @v2CliArgs --device "MSPM0G3507" --package "LQFP-48(PT)" --product "mspm0_sdk@2.07.00.05"
|
|
* @versions {"tool":"1.25.0+4268"}
|
|
*/
|
|
|
|
/**
|
|
* Import the modules used in this configuration.
|
|
*/
|
|
const GPIO = scripting.addModule("/ti/driverlib/GPIO", {}, false);
|
|
const GPIO1 = GPIO.addInstance();
|
|
const GPIO2 = GPIO.addInstance();
|
|
const I2C = scripting.addModule("/ti/driverlib/I2C", {}, false);
|
|
const I2C1 = I2C.addInstance();
|
|
const PWM = scripting.addModule("/ti/driverlib/PWM", {}, false);
|
|
const PWM1 = PWM.addInstance();
|
|
const SYSCTL = scripting.addModule("/ti/driverlib/SYSCTL");
|
|
const SYSTICK = scripting.addModule("/ti/driverlib/SYSTICK");
|
|
const TIMER = scripting.addModule("/ti/driverlib/TIMER", {}, false);
|
|
const TIMER1 = TIMER.addInstance();
|
|
const UART = scripting.addModule("/ti/driverlib/UART", {}, false);
|
|
const UART1 = UART.addInstance();
|
|
|
|
/**
|
|
* Write custom configuration values to the imported modules.
|
|
*/
|
|
const divider7 = system.clockTree["PLL_PDIV"];
|
|
divider7.divideValue = 2;
|
|
|
|
const gate7 = system.clockTree["MFCLKGATE"];
|
|
gate7.enable = true;
|
|
|
|
const multiplier2 = system.clockTree["PLL_QDIV"];
|
|
multiplier2.multiplyValue = 4;
|
|
|
|
const mux4 = system.clockTree["EXHFMUX"];
|
|
mux4.inputSelect = "EXHFMUX_XTAL";
|
|
|
|
const pinFunction4 = system.clockTree["HFXT"];
|
|
pinFunction4.inputFreq = 40;
|
|
|
|
GPIO1.$name = "LED";
|
|
GPIO1.associatedPins[0].$name = "PA0";
|
|
GPIO1.associatedPins[0].pin.$assign = "PA0";
|
|
|
|
const Board = scripting.addModule("/ti/driverlib/Board", {}, false);
|
|
Board.peripheral.$assign = "DEBUGSS";
|
|
Board.peripheral.swclkPin.$assign = "PA20";
|
|
Board.peripheral.swdioPin.$assign = "PA19";
|
|
|
|
GPIO2.$name = "SOFT_I2C";
|
|
GPIO2.associatedPins.create(2);
|
|
GPIO2.associatedPins[0].$name = "CLK";
|
|
GPIO2.associatedPins[0].pin.$assign = "PA8";
|
|
GPIO2.associatedPins[1].$name = "SDA";
|
|
GPIO2.associatedPins[1].pin.$assign = "PA9";
|
|
|
|
I2C1.$name = "I2C_1";
|
|
I2C1.advAnalogGlitchFilter = "DISABLED";
|
|
I2C1.basicEnableController = true;
|
|
I2C1.peripheral.sdaPin.$assign = "PB3";
|
|
I2C1.peripheral.sclPin.$assign = "PB2";
|
|
I2C1.sdaPinConfig.hideOutputInversion = scripting.forceWrite(false);
|
|
I2C1.sdaPinConfig.onlyInternalResistor = scripting.forceWrite(false);
|
|
I2C1.sdaPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
|
|
I2C1.sdaPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric2";
|
|
I2C1.sclPinConfig.hideOutputInversion = scripting.forceWrite(false);
|
|
I2C1.sclPinConfig.onlyInternalResistor = scripting.forceWrite(false);
|
|
I2C1.sclPinConfig.passedPeripheralType = scripting.forceWrite("Digital");
|
|
I2C1.sclPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric3";
|
|
|
|
PWM1.$name = "PWM_0";
|
|
PWM1.ccIndex = [0,1,2];
|
|
PWM1.clockDivider = 2;
|
|
PWM1.pwmMode = "CENTER_ALIGN";
|
|
PWM1.PWM_CHANNEL_0.$name = "ti_driverlib_pwm_PWMTimerCC0";
|
|
PWM1.PWM_CHANNEL_1.$name = "ti_driverlib_pwm_PWMTimerCC1";
|
|
PWM1.ccp0PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric4";
|
|
PWM1.ccp1PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric5";
|
|
PWM1.peripheral.$assign = "TIMA0";
|
|
PWM1.peripheral.ccp0Pin.$assign = "PA21";
|
|
PWM1.peripheral.ccp1Pin.$assign = "PA22";
|
|
PWM1.peripheral.ccp2Pin.$assign = "PB20";
|
|
PWM1.PWM_CHANNEL_2.$name = "ti_driverlib_pwm_PWMTimerCC2";
|
|
PWM1.ccp2PinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric6";
|
|
|
|
SYSCTL.forceDefaultClkConfig = true;
|
|
SYSCTL.peripheral.$assign = "SYSCTL";
|
|
|
|
SYSTICK.periodEnable = true;
|
|
SYSTICK.systickEnable = true;
|
|
SYSTICK.period = 16000000;
|
|
|
|
TIMER1.$name = "TIMER_0";
|
|
TIMER1.timerClkDiv = 8;
|
|
TIMER1.timerMode = "PERIODIC";
|
|
TIMER1.timerClkPrescale = 8;
|
|
TIMER1.timerClkSrc = "LFCLK";
|
|
TIMER1.interrupts = ["ZERO"];
|
|
TIMER1.timerPeriod = "2";
|
|
TIMER1.peripheral.$assign = "TIMG0";
|
|
|
|
UART1.$name = "UART_0";
|
|
UART1.rxFifoThreshold = "DL_UART_RX_FIFO_LEVEL_ONE_ENTRY";
|
|
UART1.targetBaudRate = 115200;
|
|
UART1.uartClkDiv = "8";
|
|
UART1.enableFIFO = true;
|
|
UART1.txFifoThreshold = "DL_UART_TX_FIFO_LEVEL_ONE_ENTRY";
|
|
UART1.enabledDMATXTriggers = "DL_UART_DMA_INTERRUPT_TX";
|
|
UART1.enabledInterrupts = ["DMA_DONE_RX"];
|
|
UART1.enabledDMARXTriggers = "DL_UART_DMA_INTERRUPT_RX";
|
|
UART1.interruptPriority = "1";
|
|
UART1.peripheral.$assign = "UART0";
|
|
UART1.peripheral.rxPin.$assign = "PA11";
|
|
UART1.peripheral.txPin.$assign = "PA10";
|
|
UART1.txPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric0";
|
|
UART1.rxPinConfig.$name = "ti_driverlib_gpio_GPIOPinGeneric1";
|
|
UART1.DMA_CHANNEL_TX.$name = "DMA_CH0";
|
|
UART1.DMA_CHANNEL_TX.addressMode = "b2f";
|
|
UART1.DMA_CHANNEL_TX.srcLength = "BYTE";
|
|
UART1.DMA_CHANNEL_TX.dstLength = "BYTE";
|
|
UART1.DMA_CHANNEL_TX.peripheral.$assign = "DMA_CH0";
|
|
UART1.DMA_CHANNEL_RX.$name = "DMA_CH1";
|
|
UART1.DMA_CHANNEL_RX.addressMode = "f2b";
|
|
UART1.DMA_CHANNEL_RX.srcLength = "BYTE";
|
|
UART1.DMA_CHANNEL_RX.dstLength = "BYTE";
|
|
UART1.DMA_CHANNEL_RX.transferMode = "FULL_CH_REPEAT_SINGLE";
|
|
|
|
const ProjectConfig = scripting.addModule("/ti/project_config/ProjectConfig", {}, false);
|
|
ProjectConfig.migrationCondition = true;
|
|
|
|
/**
|
|
* Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
|
|
* version of the tool will not impact the pinmux you originally saw. These lines can be completely deleted in order to
|
|
* re-solve from scratch.
|
|
*/
|
|
I2C1.peripheral.$suggestSolution = "I2C1";
|
|
UART1.DMA_CHANNEL_RX.peripheral.$suggestSolution = "DMA_CH1";
|