mt6701 uart_redirect

README.md

@@ -0,0 +1,41 @@
+## Example Summary
+
+Empty project using DriverLib.
+This example shows a basic empty project using DriverLib with just main file
+and SysConfig initialization.
+
+## Peripherals & Pin Assignments
+
+| Peripheral | Pin | Function |
+| --- | --- | --- |
+| SYSCTL |  |  |
+| DEBUGSS | PA20 | Debug Clock |
+| DEBUGSS | PA19 | Debug Data In Out |
+
+## BoosterPacks, Board Resources & Jumper Settings
+
+Visit [LP_MSPM0G3507](https://www.ti.com/tool/LP-MSPM0G3507) for LaunchPad information, including user guide and hardware files.
+
+| Pin | Peripheral | Function | LaunchPad Pin | LaunchPad Settings |
+| --- | --- | --- | --- | --- |
+| PA20 | DEBUGSS | SWCLK | N/A | <ul><li>PA20 is used by SWD during debugging<br><ul><li>`J101 15:16 ON` Connect to XDS-110 SWCLK while debugging<br><li>`J101 15:16 OFF` Disconnect from XDS-110 SWCLK if using pin in application</ul></ul> |
+| PA19 | DEBUGSS | SWDIO | N/A | <ul><li>PA19 is used by SWD during debugging<br><ul><li>`J101 13:14 ON` Connect to XDS-110 SWDIO while debugging<br><li>`J101 13:14 OFF` Disconnect from XDS-110 SWDIO if using pin in application</ul></ul> |
+
+### Device Migration Recommendations
+This project was developed for a superset device included in the LP_MSPM0G3507 LaunchPad. Please
+visit the [CCS User's Guide](https://software-dl.ti.com/msp430/esd/MSPM0-SDK/latest/docs/english/tools/ccs_ide_guide/doc_guide/doc_guide-srcs/ccs_ide_guide.html#sysconfig-project-migration)
+for information about migrating to other MSPM0 devices.
+
+### Low-Power Recommendations
+TI recommends to terminate unused pins by setting the corresponding functions to
+GPIO and configure the pins to output low or input with internal
+pullup/pulldown resistor.
+
+SysConfig allows developers to easily configure unused pins by selecting **Board**→**Configure Unused Pins**.
+
+For more information about jumper configuration to achieve low-power using the
+MSPM0 LaunchPad, please visit the [LP-MSPM0G3507 User's Guide](https://www.ti.com/lit/slau873).
+
+## Example Usage
+
+Compile, load and run the example.