42 lines
2.0 KiB
Markdown
42 lines
2.0 KiB
Markdown
|
## Example Summary
|
||
|
|
|
||
|
|
Empty project using DriverLib.
|
||
|
|
This example shows a basic empty project using DriverLib with just main file
|
||
|
|
and SysConfig initialization.
|
||
|
|
|
||
|
|
## Peripherals & Pin Assignments
|
||
|
|
|
||
|
|
| Peripheral | Pin | Function |
|
||
|
|
| --- | --- | --- |
|
||
|
|
| SYSCTL | | |
|
||
|
|
| DEBUGSS | PA20 | Debug Clock |
|
||
|
|
| DEBUGSS | PA19 | Debug Data In Out |
|
||
|
|
|
||
|
|
## BoosterPacks, Board Resources & Jumper Settings
|
||
|
|
|
||
|
|
Visit [LP_MSPM0G3507](https://www.ti.com/tool/LP-MSPM0G3507) for LaunchPad information, including user guide and hardware files.
|
||
|
|
|
||
|
|
| Pin | Peripheral | Function | LaunchPad Pin | LaunchPad Settings |
|
||
|
|
| --- | --- | --- | --- | --- |
|
||
|
|
| PA20 | DEBUGSS | SWCLK | N/A | <ul><li>PA20 is used by SWD during debugging<br><ul><li>`J101 15:16 ON` Connect to XDS-110 SWCLK while debugging<br><li>`J101 15:16 OFF` Disconnect from XDS-110 SWCLK if using pin in application</ul></ul> |
|
||
|
|
| PA19 | DEBUGSS | SWDIO | N/A | <ul><li>PA19 is used by SWD during debugging<br><ul><li>`J101 13:14 ON` Connect to XDS-110 SWDIO while debugging<br><li>`J101 13:14 OFF` Disconnect from XDS-110 SWDIO if using pin in application</ul></ul> |
|
||
|
|
|
||
|
|
### Device Migration Recommendations
|
||
|
|
This project was developed for a superset device included in the LP_MSPM0G3507 LaunchPad. Please
|
||
|
|
visit the [CCS User's Guide](https://software-dl.ti.com/msp430/esd/MSPM0-SDK/latest/docs/english/tools/ccs_ide_guide/doc_guide/doc_guide-srcs/ccs_ide_guide.html#sysconfig-project-migration)
|
||
|
|
for information about migrating to other MSPM0 devices.
|
||
|
|
|
||
|
|
### Low-Power Recommendations
|
||
|
|
TI recommends to terminate unused pins by setting the corresponding functions to
|
||
|
|
GPIO and configure the pins to output low or input with internal
|
||
|
|
pullup/pulldown resistor.
|
||
|
|
|
||
|
|
SysConfig allows developers to easily configure unused pins by selecting **Board**→**Configure Unused Pins**.
|
||
|
|
|
||
|
|
For more information about jumper configuration to achieve low-power using the
|
||
|
|
MSPM0 LaunchPad, please visit the [LP-MSPM0G3507 User's Guide](https://www.ti.com/lit/slau873).
|
||
|
|
|
||
|
|
## Example Usage
|
||
|
|
|
||
|
|
Compile, load and run the example.
|